Carrera 10109 2.4 GHz Wireless Control Set DUO Digital 124/132
Experience the joys of wireless racetrack fun for Carrera DIGITAL 124 and Carrera DIGITAL 132 with the 2.4 GHz WIRELESS+ set-up.
Carrera Real Racing:
2.4 GHz WIRELESS+ radio controlled technology
Race for up to 6 drivers
Ultra-light, wireless speed controller
Recharger with direct connection to the Carrera circuit
Operating range up to 15m
Uninterrupted and frequency independent due to frequency hopping
8 hours of non-stop operation
Battery powered with Lithium Polymer power pack
Coding instructions for 2.4 GHz controllers with the 30352 Control Unit:
Please make sure there is only 1 wireless receiver plugged
into your track.This receiver should be
plugged in to either the 1st or 2nd tower on your control
unit.
Step 1- Take all the cars off of the track
Take controller 1 and hit the set button on the receiver,
when you see the #1, press the black button on top of your controller
Take the car 1 and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 1 should now be coded to controller 1.
Step 2-
Take car 1 off the track
Take controller 2 and hit the set button twice on the
receiver, when you see the #2, press the black button on top of your
controller.
Take the car 2 and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 2 should now be coded to controller 2.
Step 3 -
Take car 2 off the track
Take controller 3 and hit the set button twice on the
receiver, when you see the #3, press the black button on top of your
controller.
Take the car 3 and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 3 should now be coded to controller 3.
Follow the same steps for the remaining cars/controllers.
You will not need to do this before every race; each
car will stay coded to its controller. You should now be set to race
Carrera 10110 2.4 GHz Wireless Control Set, Single Digital 124/132
Experience the joys of wireless racetrack fun for Carrera DIGITAL 124 and Carrera DIGITAL 132 with the 2.4 GHz WIRELESS+ set-up.
Carrera Real Racing:
2.4 GHz WIRELESS+ radio controlled technology
Race for up to 6 drivers
Ultra-light, wireless speed controller
Recharger with direct connection to the Carrera circuit
Operating range up to 15m
Uninterrupted and frequency independent due to frequency hopping
8 hours of non-stop operation
Battery powered with Lithium Polymer power pack
Contents:
1 2.4 GHz WIRELESS+ Speed Controller
1 2.4 GHz WIRELESS+ Receiver
1 2.4 GHz WIRELESS+ single charging station
1 Adapter Unit
1 Shoulder complement
1 End sections outside shoulder (left/right)
Lithium-polymer battery
Coding instructions for 2.4 GHz controllers with the 30352 Control Unit:
Please make sure there is only 1 wireless receiver plugged
into your track.This receiver should be
plugged in to either the 1st or 2nd tower on your control
unit.
Step 1- Take all the cars off of the track
Take "controller 1" and hit the set button on the receiver,
when you see the #1, press the black button on top of your controller
Take the "car 1" and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 1 should now be coded to controller 1.
Step 2-
Take car 1 off the track
Take "controller 2" and hit the set button twice on the
receiver, when you see the #2, press the black button on top of your
controller.
Take the "car 2" and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 2 should now be coded to controller 2.
Step 3 -
Take car 2 off the track
Take "controller 3" and hit the set button twice on the
receiver, when you see the #3, press the black button on top of your
controller.
Take the "car 3" and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 3 should now be coded to controller 3.
Follow the same steps for the remaining cars/controllers.
You will not need to do this before every race; each
car will stay coded to its controller. You should now be set to race
Carrera 10111 2.4 GHz Wireless, Single Controller Digital 124/132
*** Comes with 1 green and 1 blue button ***
This controller requires a charging station (10114) and receiver (10112) to function. These accessories can be purchased as a set with either the 2.4 GHz Duo Set (10109) or the 2.4 GHz Single set (10110).
If adding to a digital set that already has 2.4 GHz controllers, additional chargers/receivers are not necessary as 1 receiver will control up to 6 - 2.4 GHz Controllers.
Coding instructions for 2.4 GHz controllers with the 30352 Control Unit:
Please make sure there is only 1 wireless receiver plugged
into your track.This receiver should be
plugged in to either the 1st or 2nd tower on your control
unit.
Step 1- Take all the cars off of the track
Take "controller 1" and hit the set button on the receiver,
when you see the #1, press the black button on top of your controller
Take the "car 1" and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 1 should now be coded to controller 1.
Step 2-
Take car 1 off the track
Take "controller 2" and hit the set button twice on the
receiver, when you see the #2, press the black button on top of your
controller.
Take the "car 2" and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 2 should now be coded to controller 2.
Step 3 -
Take car 2 off the track
Take "controller 3" and hit the set button twice on the
receiver, when you see the #3, press the black button on top of your
controller.
Take the "car 3" and put it on the track.
Press the code button once and then press the trigger on
your controller. Car 3 should now be coded to controller 3.
Follow the same steps for the remaining cars/controllers.
You will not need to do this before every race; each
car will stay coded to its controller. You should now be set to race
10112 Wireless Receiver for use only with Digital 1/24 and Digital 1/32
Features of 2.4 GHz Wireless+:
2.4 GHz WIRELESS+ radio controlled technology
Race for up to 6 drivers
Ultra-light, wireless speed controller
Recharger with direct connection to the Carrera circuit
Operating range up to 15m
Uninterrupted and frequency independent due to frequency hopping
8 hours of non-stop operation
Battery powered with Lithium Polymer power pack
Package includes the receiver only, typically purchased as a replacement as 1 receiver will program all 6 of your controllers.
10113 Wireless Charging Station Double for use only with Digital 1/24 and Digital 1/32
Features of 2.4 GHz Wireless+:
2.4 GHz WIRELESS+ radio controlled technology
Race for up to 6 drivers
Ultra-light, wireless speed controller
Recharger with direct connection to the Carrera circuit
Operating range up to 15m
Uninterrupted and frequency independent due to frequency hopping
8 hours of non-stop operation
Battery powered with Lithium Polymer power pack
Package includes the charging stations only, typically purchased if additional or replacement charging stations are needed.
10113 Carrera 10113 Wireless Charging Station (Double), Bargain Lot Item - for use only with Digital 1/24 and Digital 1/32
*** NO BOX ***
Features of 2.4 GHz Wireless+:
2.4 GHz WIRELESS+ radio controlled technology
Race for up to 6 drivers
Ultra-light, wireless speed controller
Recharger with direct connection to the Carrera circuit
Operating range up to 15m
Uninterrupted and frequency independent due to frequency hopping
8 hours of non-stop operation
Battery powered with Lithium Polymer power pack
***This item includes the charging stations only, typically purchased if additional or replacement charging stations are needed.
10114 Wireless Charging Station, Single for use only with Digital 1/24 and Digital 1/32
Features of 2.4 GHz Wireless+:
2.4 GHz WIRELESS+ radio controlled technology
Race for up to 6 drivers
Ultra-light, wireless speed controller
Recharger with direct connection to the Carrera circuit
Operating range up to 15m
Uninterrupted and frequency independent due to frequency hopping
8 hours of non-stop operation
Battery powered with Lithium Polymer power pack
Package includes 1 charging station, typically purchased if additional or replacement charging stations are needed.
Carrera Digital Track Layout. Fits in a 4 x 16 Foot Space.
Features:
This track is set up for 4 racers Easily add 2 additional racers (for a total of 6 racers at 1 time) by adding 1 x item 10120 (Wireless Controllers), 2 x item 30353 (Driver Displays) and 2 additional cars from the Digital 132 Car Category
Total track length is approximately 60 feet.
Layout is 4 x 16 ft (easily fits on 2 - 4 x 8 sheets of plywood).
Includes Carrera's control unit and all of the digital accessories needed for real racing experience.
3 Different lane change/passing opportunities (more can be added if you wish)
0-20 Volt Adjustable aftermarket power supply is included allowing you to race up to 6 cars (and a ghost/pace car) with no loss of power.
Contents:
4 x Wireless Controllers (10121)
1 x Wireless Receiver (10122)
3 x Double Lane Change Sections (item 30347)
4 x Driver Displays (30353)
1 x Start Lights (30354)
1 x Lap Counter (30355)
1 x Position Tower (30357)
1 x Pit Lane (30356)
1 x Aftermarket Power Supply and Connection Cable (PMTR1400b and PMTR1400W)
All Straights, Curves and Supports Needed to Complete This Layout
Track Legend with Parts List for Easy Set-Up
4 - Digital 132 Cars Not able
to swap cars, however, additional cars can be added to the order.
1 x Ferrari 296 GT3 "Emil Frey Racing, No.14" (32000)
1 x Mercedes-AMG GT3 Evo "Mercedes-AMG Team" No. 4
Carrera Digital Track Layout. Fits in a 8 x 16 Foot Space.
Features:
This
track is set up for 4 racers Easily add 2 additional racers (for a
total of 6 racers at 1 time) by adding 1 x item 10120 (Wireless
Controllers), 2 x item 30353 (Driver Displays) and 2 additional cars
from the Digital 132 Car Category
Total track length is approximately 65 feet.
Layout is 8 x 16 ft (easily fits on 4 - 4 x 8 sheets of plywood).
Includes Carrera's control unit and all of the digital accessories needed for real racing experience.
4 Different lane change/passing opportunities (more can be added if you wish)
0-20
Volt Adjustable aftermarket power supply is included allowing you to
race up to 6 cars (and a ghost/pace car) with no loss of power.
Contents:
4 x Wireless Controllers (10121)
1 x Wireless Receiver (10122)
4 x Double Lane Change Sections (item 30347)
4 x Driver Displays (30353)
1 x Start Lights (30354)
1 x Lap Counter (30355)
1 x Position Tower (30357)
1 x Pit Lane (30356)
1 x Aftermarket Power Supply and Connection Cable (PMTR1400b and PMTR1400W)
All Straights, Curves and Supports Needed to Complete This Layout
Track Legend with Parts List for Easy Set-Up
4 - Digital 132 Cars Not able
to swap cars, however, additional cars can be added to the order.
1 x Ferrari 296 GT3 "Emil Frey Racing, No.14" (32000)
1 x Mercedes-AMG GT3 Evo "Mercedes-AMG Team" No. 4