PMTR88796 Frankenslot WIRELESS Trigger Controller for Carrera Digital 124/132. Multiple colors available, if you are looking for a specific color, please leave us a note with that request and we will do our best to accomodate. Colors choices are RED, BLACK, BLUE, YELLOW, NEON GREEN, ORANGE, PURPLE AND CLEAR.
Frankenslot WIRELESS Trigger Controller for Carrera Digital 124/132. Now you can have a wireless trigger controller for Carrera's D132 / 124 System!
Features:
Includes a new/longer trigger lever extension for single- or two-finger operation - easily replaced - without controller disassembly
The controller functions with a
microcontroller, all the functions of the Frankenslot Speedflow controller box are
integrated into this controller.
Connects to the Carrera system via the Carrera wireless receiver
Operation on two standard
AAA batteries - provides continuous operation for more than 80
hours of racing (if using high quality batteries)
The controller has an ON / OFF switch and an LED display
Software Version V1.05, Speedflow Wireless Controller V2.1
Power Consumption when off - Real power seperation, no consumption
Power Consumption when operating - approximately 16mA
Power Consumption in standby - approximately 200 uA
Operating Instructions:
Set the channel and connect with wireless receiver, 10112 (not included)
Switch the controller off, select channel and during power-up, hold the switch button on the controller.
Receiver wil acknowledge the proramming with the "7-segment flashing run"
Controller ready to race!
Configuration Mode:
Control
was connected with receiver. Switch the controller off. Regulator gas
completely by pressing hold and hold switch button and then turn on
controller. LED goes on. To let go of the switch button and trigger the
configuration begins.
The configuration is done based on the SpeedFlow box programming
The
selection of the desired configuration value is done by briefly
pressing of the switch button. Storing the value selected is carried out
by the LED hold acknowledged storing the Lanechange-button, to a rapid
Flash. After that, the next configuration option is indicated by
flashing. The following configuration options are available.
Number of Speed Levels:
1 x Flash - Original Carrera 16 speeds
3 x Flash - Speedflow regulation (30 speeds)
4 x Flash - Speedflow regulation (44 speeds)