Store Front Account Search Product List Basket Contents Checkout
Products:


 
New for 2024
Digital 132
 
Digital 132 Sets
Digital 132 Cars
Track Accessories
Digital 132 Pit Stop
Digital 124
Evolution 1/32
132/124 Track
Digital Accessories
132/124 Parts
Exclusiv 1/24
Carrera GO 143
Digital 143
Limited Editions
Buildings & Figures for your 1/32 or 1/24 Scale Layout
Discontinued
parts_finder_btn
Newsletter
Bargain Lot
1/32 Scalextric Cars

Gift Certificates

Carrera RC

Slot.it








Click Here For

RC Vehicles

Click Here For

G-Scale Trains
Join us on Facebook
Now Accepting Paypal
We Accept
Credit/Debit Cards


SSL


PGT-20115LMXD 1/32 Rear Urethane Tuning Tires (see description)
 
PGT-20115LMXD  1/32 Rear Urethane Tuning Tires (see description)
Item: PGT-20115LMXD
Price: $4.49
plus shipping
Inventory: Ships in 7-10 Days
 
 
Quantity:
PGT-20115LMXD  1/32 Rear Urethane Tuning Tires (see description)


1 Pair of Rear, Urethane Slot Car Tires, handmade by Paul Gage.

These tuning tires provide outstanding traction and handling characteristics that wont disappoint! Very soft tire for plastic or smooth wooden tracks.

This is a great performance tire for Carrera models:
XBow GTX

PLEASE NOTE: These tuning tires will look much smaller than the Carrera stock tires you are replacing (in some cases you may even be able to fit the tuning tire, inside the stock tire).  Some tuning tires may fit multiple wheels, these tires are made to stretch so Paul doesn�t need to have a separate tire available for each type of car. 

When installing you will need to stretch the tuning tire over the wheel..  To avoid damage to the car, or wheel, we have found it is easiest to take the chassis off by removing the 4 bottom screws prior to installation.


This is a great performance tire for the following Cars:
Aston Martin Vanquish '13 version
2013 and newer DTMs
BMW Z4 - 2014 models
Corvette C7.R
Corvette C8.R
Mercedes AMG GT3
Ford GT
Corvette C6R (produced after 2006)
Porsche 911/997 GT
Porsche 935 GT2
and more.....

Once installed all you need to do is sand the tire lightly to true it up and remove any convex or concave centers, and away you go. This can be done easily using a 120 grit garnet sand paper or emery board, then finish with a 240 or 480 grit. A recommendation from Paul Gage: If you wish to glue on the rear tires, use a clear nail polish. Just clean the tire with acetone, lightly sand the bead on the hub, paint a generous layer on the inside bead of the hub, paint the outside bead of the tire, then mount the tire. Allow one hour to dry, sand them true, and away you go!

This is a replacement for PGT-20125LMXD, it is a narrower tire which will require less sanding.


Carrera Slots
308 B Brighton Avenue
Buffalo, Minnesota 55313

Sitemap

877-269-7805
763.595.1075
[email protected]