|
PGT-201208LMXD 1/32 Rear Urethane Tuning Tires, BMW 320 Turbo
|
|
|
Item: PGT-201208LMXD
Price: $4.49
plus shipping
Inventory: Ships in 7-10 Days
|
|
|
1/32 Rear Urethane Tuning Tires for the La Ferrari (Enzo) and Opal Steinmetz (Fits Digital 1/32 and Evolution)
1 Pair of Rear, Urethane Slot Car Tires, handmade by Paul Gage.
These tuning tires provide outstanding traction and handling characteristics that wont disappoint!
Very soft tire for plastic or smooth wooden tracks.
This is a great performance tire for the following Carrera Cars:
BMW 320 Turbo
Once installed all you need to do is sand the tire lightly to true it up
and remove any convex or concave centers, and away you go. This can be
done easily using an 80 grit garnet sand paper or emery board, then
finish with a 240 or 480 grit.
A recommendation from Paul Gage:
If you wish to glue on the rear tires, use a clear nail polish. Just
clean the tire with acetone, lightly sand the bead on the hub, paint a
generous layer on the inside bead of the hub, paint the outside bead of
the tire, then mount the tire. Allow one hour to dry, sand them true,
and away you go!
PLEASE
NOTE: These tuning tires will look much smaller than the Carrera stock
tires you are replacing (in some cases you may even be able to fit the
tuning tire, inside the stock tire). Some tuning tires may fit multiple
wheels, these tires are made to stretch so Paul doesn't need to have a
separate tire available for each type of car. When
installing you will need to stretch the tuning tire over the wheel..
To avoid damage to the car, or wheel, we have found it is easiest to
take the chassis off by removing the 4 bottom screws prior to
installation.
|
|