PGT-21105 1/32 Rear Urethane Tuning Tires (see description)
PGT-21105 1/32 Rear Urethane Tuning Tires (see description)|
1 Pair of Rear, Urethane Slot Car Tires, handmade by Paul Gage.
These tuning tires provide outstanding traction and handling characteristics that wont disappoint!
Very soft tire for plastic or smooth wooden tracks
This is a great performance tire for the following 1/32 Scale Models:
Chevrolet Camaro 1971 Trans Am
Ford XC Falcon
Ford XB Falcon
Ford Falcon XW
Camaro Z28 - will require some additional sanding
Once installed all you need to do is sand the tire lightly to true it up
and remove any convex or concave centers, and away you go. This can be
done easily using a 120 grit garnet sand paper or emery board, then
finish with a 240 or 480 grit.
A recommendation from Paul Gage:
If you wish to glue on the rear tires, use a clear nail polish. Just
clean the tire with acetone, lightly sand the bead on the hub, paint a
generous layer on the inside bead of the hub, paint the outside bead of
the tire, then mount the tire. Allow one hour to dry, sand them true,
and away you go!