1/24 Scale Front Tires for Hot Rods (with and without fenders)
Once installed all you need to do is sand the tire lightly to true it up
and remove any convex or concave centers, and away you go. This can be
done easily using a 120 grit garnet sand paper or emery board, then
finish with a 240 or 480 grit. A recommendation from Paul Gage: If you
wish to glue on the rear tires, use a clear nail polish. Just clean the
tire with acetone, lightly sand the bead on the hub, paint a generous
layer on the inside bead of the hub, paint the outside bead of the tire,
then mount the tire. Allow one hour to dry, sand them true, and away
you go!
