SKU: SISP43 Slot.It SISP43 for Digital Conversion to Carrera Digital 132

Slot.It SISP43 for Digital Conversion to Carrera Digital 132

• Small (25x15 mm) in-car chip to convert other manufacture's cars to run on Carrera D132
• Will convert a regular or high-performance car like Slot.it, Thunderslot or NSR to work on your Carrera Digital 132 track.
• Accepts the higher amperage draw of Slot.it and similar cars with these motors.
• Comes with standard Slot.it connectors and Scalextric socket.  If the car you are converting does not have direct connect terminals they are sold separately (Slot.it part No.SP45).
• External infrared LED on wires may be used (available separately)

NOTE: The safety car function is not possible with this chip. Ghost function does work.

Click here to watch the video on how to install

SP43 ASSEMBLY INSTRUCTIONS
Mounting procedure for any slot car equipped with Slot.it quick-connectors:
1. Loosen chassis screws, take off chassis
2. Connect end A to the front brushes quick-connector
3. Connect end B to the motor quick-connector
4. Proceed to programming according to normal Carrera guidelines

Mounting procedure for any slot car equipped with Scalextric 4-PIN connector (DPR model):
1. Loosen chassis screws, take off chassis
2. Loosen bottom hatch screw, disconnect 4-PIN connector
3. If Slot.it replacement hatch is used, securely fix the chip to it with the 2 clamps. Make sure the infrared LED is visible from the bottom hole
4. Connect the chip with the 4-PIN connector through the dedicated port
5. Proceed to programming according to normal Carrera guidelines

Note: If car has inverted polarity (car runs the wrong way), use inverter cable (CODE: SP46), inserted between chip and motor.